Boiler efficiency and load factor

senseadmin
1 Min Read
Disclosure: This website may contain affiliate links, which means I may earn a commission if you click on the link and make a purchase. I only recommend products or services that I personally use and believe will add value to my readers. Your support is appreciated!

Like any other devices, the boiler energy efficiency is a factor of its load factor. Figure (i) and also Figure (iii) show typical of such efficiencies.


Figure (iii) – Impact of boiler load factor on efficiency


Accordingly, for this boiler the efficiency is highest at certain point and then drop off with changes in load. Thus boiler load management could be considered as one aspect of energy efficiency. Figure (iii) shows that at 70% load, the efficiency is 80% and at 30% load, the efficiency is 63%; a significant drop.

Operating the boiler at low load is thus inefficient. Avoiding low load boiler operation will depend on ship type, number of boilers and where the steam is used. Generally, if there are two auxiliary boilers on a ship, they must not run in parallel if one can supply the whole steam demand; unless safety issues dictates the need for such a parallel operation case.

Share This Article
Follow:
Prabhu TL is an author, digital entrepreneur, and creator of high-value educational content across technology, business, and personal development. With years of experience building apps, websites, and digital products used by millions, he focuses on simplifying complex topics into practical, actionable insights. Through his writing, Dilip helps readers make smarter decisions in a fast-changing digital world—without hype or fluff.
Leave a review