Advanced Design of Stee Structures 2 min read
DIFFERENCES BETWEEN POST AND BEAM AND RIGID FRAME
Post and Beam: When a vertical load weighs on a common post and beam structure, it is carried by a horizontal…
THE LATEST THINKING
Every story.
Browse our articles in publication order, with new stories added automatically.
Advanced Design of Stee Structures 2 min read
WHAT IS A RIGID FRAME BUILDING?
The structure of a steel rigid frame building is characterized by its rigid connections of straight or tapered columns and…
Advanced Design of Stee Structures 7 min read
Buckling length in sway and non-sway structures
One of the few difficult things about buckling lengths is, that you need to know if your structure is a…
Advanced Design of Stee Structures 2 min read
Strength of Beam-Column Segments
INTRODUCTION In the following two chapters the strength and behavior of beam-column segments subjected to compression combined with biaxial bending are presented. As the…
Advanced Design of Stee Structures 1 min read
Biaxial bending
A column is a vertical structural member designed to transfer a compressive load. For example, a column might transfer loads from a ceiling, floor or roof slab or from a beam, to the foundations. Columns also carry the bending…
Advanced Design of Stee Structures 1 min read
What is an Axial Force?
Axial force is the compression or tension force acting in a member. If the axial force acts through the centroid of the member it…
Advanced Design of Stee Structures 2 min read
Difference Between Short Column and Long Column
Sr.No. Long Column Short Column 1 This column is considered to be long if the ratio of effective length of…
Advanced Design of Stee Structures 2 min read
Slenderness Ratio
lenderness ratio of column is basically defined as the ratio of effective length of the column to the least radius of…
Advanced Design of Stee Structures 1 min read
Shapes of Cross-Section
• Square • Rectangular • Circular • Pentagonal • Hexagonal • Octagonal • T-Shape or L-Shape etc. Material of Construction • Timber Column • Masonry Column • R.C.C Column • Steel Column • Composite Column
Advanced Design of Stee Structures 2 min read
What Is Column?
• A compression member, i.e., column, is an important element of every reinforced concrete structure. These are used to transfer a load of superstructure to the…
Advanced Design of Stee Structures 5 min read
Long-span beam
Design of long span beams The use of long span beams results in a range of benefits, including flexible, column-free internal…
Advanced Design of Stee Structures 1 min read
Short beam reinforcement
Beams with short span lengths compared to the span length of the other beams that belong to the same floor,…
