Advanced 5 min read
Whether Or Not To Select Concrete For Construction?
Factors affecting choice of concrete for a structure The choice of whether a structure should be built of concrete, steel,…
THE LATEST THINKING
Every story.
Browse our articles in publication order, with new stories added automatically.
Advanced 3 min read
Quality Control Checklist For Excavation Work
Earth Excavation Checklist excavation checklist The following checklist should be used as a guide for better quality control over earth…
Advanced 2 min read
How To Check Suitability Of Water For Concrete Mixing?
Suitability Of Water For Concrete Mixing OBJECTIVE To assess suitability of water for use in concrete mix. EQUIPMENT § Measuring cylinder § Cube moulds…
Advanced 8 min read
Scaffolds & Ladders – Safety At Construction
Scaffolds and ladders 1. GENERAL PROVISIONS 1. Where work cannot safely be done on or from the ground or from part of…
Advanced 4 min read
How Beam Column Joints Resists Earthquakes?
In RC buildings, portions of columns that are common to beams at their intersections are called beam-column joints (Figure 1).…
Advanced 4 min read
Splitting Tensile Strength Test Of Concrete (Is-516)
Determine splitting tensile strength of cylindrical concrete specimens OBJECTIVE: This method covers the determination of the splitting tensile strength of…
Advanced 3 min read
15 Different Types Of Loads On Building (In Short)
Types of loads External loads on a structure may be classified in several different ways. In one classification, they may…
Advanced 3 min read
Pig Iron, Cast Iron & Wrought Iron – What’s The Difference?
1. Pig iron The crude impure iron, which is extracted from iron ores, is known as pig-iron and it forms the…
Advanced 4 min read
Different Types Of Defects In Timber
Types of defects in timber Types of Defects in timber are grouped into the following divisions. 1. DEFECTS DUE TO CONVERSION…
Advanced 11 min read
6 Important Engineering Properties Of Mortar
Properties of mortar Properties of mortar which are sought for use in masonry are: workability, water retentivity, rate of stiffening,…
Advanced 5 min read
8 Primary Requirements Of Formwork
REQUIREMENTS OF FORMWORK Requirements of formwork – quality, safety & economy In the selection of materials for formwork, the three…
Advanced 3 min read
Site Engineer’s Check List For Quality Brickwork
Brickwork check list for site engineers Quality of brickwork While on site, a site engineer must ensure that the brickwork…
