Browse our articles in publication order, with new stories added automatically.
Semiconductors can be broadly classified into Intrinsic and Extrinsic Semiconductors. Intrinsic Semiconductors start conducting at temperatures above the room temperature, developing important electronic…
Materials in electronics can be classified as electrotechnical, constructional and special. Electrotechnical materials are classified by four groups: Conductors Semiconductors…
Synchronous Machine constitutes of both synchronous motors as well as synchronous generators. An AC system has some advantages over DC system.…
The DC machine can be classified into two types namely DC motors as well as DC generators. Most of the DC machines are…
Homes in North America typically are powered with both 120-volt and 240-volt alternating current (AC) electricity. (Because of voltage variations,…
The electrical system is of two types i.e., the single phase system and the three phase system. The single phase…
Electrical power consumed in an AC circuit can be represented by the three sides of a right angled triangle, known…
An alternating waveform or AC waveform, which is associated with the AC current, is a periodic waveform that alternates between…
Alternating current Direct current (DC) circuits involve current flowing in one direction. In alternating current (AC) circuits, instead of a…
Maximum Power Transfer Theorem can be stated as – A resistive load, being connected to a DC network, receives maximum power…
Norton’s Theorem states that – A linear active network consisting of independent or dependent voltage source and current sources and the…
Theory: In electrical circuit theory, Thevenin’s theorem for linear electrical networks states that any combination of voltage sources,…