Basics 5 min read
Quality Control of Lighting
After a component has been properly processed, it is ready for inspection. While automated vision inspection systems are sometimes used,…
THE ARCHIVES
Author: Prabhu TL.
Prabhu TL is a SenseCentral contributor covering digital products, entrepreneurship, and scalable online business systems. He focuses on turning ideas into repeatable processes—validation, positioning, marketing, and execution. His writing is known for simple frameworks, clear checklists, and real-world examples. When he’s not writing, he’s usually building new digital assets and experimenting with growth channels.
← Explore all topics Basics 3 min read
Quality Control of Developer
The function of the developer is very important in a penetrant inspection. It must draw out of the discontinuity a…
Basics 4 min read
Quality Control of Penetrant
The quality of a penetrant inspection is highly dependent on the quality of the penetrant materials used. Only products meeting…
Basics 2 min read
Process Control of Temperature
The temperature of the penetrant materials and the part being inspected can have an effect on the results. Temperatures from…
Basics 3 min read
Use and Selection of a Developer
The use of developer is almost always recommended. One study reported that the output from a fluorescent penetrant could be…
Basics 6 min read
Penetrant Removal Process
The penetrant removal procedure must effectively remove the penetrant from the surface of the part without removing an appreciable amount…
Basics 4 min read
Penetrant Application and Dwell Time
The penetrant material can be applied in a number of different ways, including spraying, brushing, or immersing the parts in…
Basics 4 min read
Selection of a Penetrant Technique
The selection of a liquid penetrant system is not a straightforward task. There are a variety of penetrant systems and…
Basics 3 min read
Preparation of Part
One of the most critical steps in the penetrant inspection process is preparing the part for inspection. All coatings, such…
Basics 4 min read
Developers
The role of the developer is to pull the trapped penetrant material out of defects and spread it out on…
Basics 2 min read
Emulsifiers
When removal of the penetrant from a defect due to over-washing of the part is a concern, a post-emulsifiable penetrant…
Basics 1 min read
Removability
Removing the penetrant from the surface of the sample, without removing it from the flaw, is one of the most…