Advanced 2 min read
Electromagnetic Stir Casting: An Approach to Produce Hybrid Metal Matrix Composite (MMC)
(Figure: Experimental Setup) A metal matrix composite is a composite material that constitutes one metal and other different metal or…
THE ARCHIVES
Author: Prabhu TL.
Prabhu TL is a SenseCentral contributor covering digital products, entrepreneurship, and scalable online business systems. He focuses on turning ideas into repeatable processes—validation, positioning, marketing, and execution. His writing is known for simple frameworks, clear checklists, and real-world examples. When he’s not writing, he’s usually building new digital assets and experimenting with growth channels.
← Explore all topics Advanced 4 min read
Motor Technology – The ‘Centre’ of an Electric Vehicle Efficiency
In the energy starving world, demand of energy is continuously raising, of-course not parallel to its supply. This issue become…
Basics 3 min read
Steering system
On passenger cars, the driver must select the steering wheel angle to keep deviation from the desired course low. However,…
Basics 2 min read
Independent wheel suspensions – general
The chassis of a passenger car must be able to handle the engine power installed. Ever-improving acceleration, higher peak and…
Basics 4 min read
General characteristics of wheel suspensions
The suspension of modern vehicles need to satisfy a number of requirements whose aims partly conflict because of different operating…
Basics 2 min read
Flywheel energy storage
Flywheel energy storage systems for use in vehicle propulsion has reached application in the light tram vehicle. They have also…
Basics 2 min read
Improvements in electronic engine control
The digital engine control system in this chapter has been made possible by a rapid evolution of the state of…
Basics 3 min read
Summary of control modes
Engine crank (start) The following list is a summary of the engine operations in the engine crank (starting) mode. Here,…
Basics 1 min read
System diagnosis
Another important feature of microcomputer engine control systems is their ability to diagnose failures in their control systems and alert…
Basics 1 min read
Automatic system adjustment
Another important feature of microcomputer engine control systems is their ability to be programmed to adapt to parameter changes. Many…
Basics 1 min read
Evaporative emissions canister purge
During engine-off conditions, the fuel stored in the fuel system tends to evaporate into the atmosphere. To reduce these HC…
Basics 2 min read
Closed-loop ignition timing
The ignition system described in the foregoing section is an open-loop system. The major disadvantage of open loop control is…