Advanced Design of Stee Structures 1 min read
Inspection Of Welds
As we have seen in previews website pages, defects in welds are inevitable. Nevertheless, the poor weld quality leads to…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Advanced Design of Stee Structures 5 min read
FILLET WELDED JOINTS
Fillet welded joints such as ‘T’, lap and corner joints are the most common connection in welded fabrication. In total…
Advanced Design of Stee Structures 7 min read
Analysis And Design Of Fillet Welds
Analysis And Design Of Fillet Welds ASSUMPTIONS IN THE ANALYSIS OF WELDED JOINTS The following assumptions are made in the…
Advanced Design of Stee Structures 2 min read
FAILURE OF BOLTED CONNECTIONS
Failure of bolted connection can be classified broadly in to two: (1) failure of the bolt and (2) failure of…
Advanced Design of Stee Structures 4 min read
COMPARING WELDED AND BOLTED UNIONS
During the planning and design stage of any project, engineers must decide which material or tool is the best to…
Advanced Design of Stee Structures 3 min read
Types of Steel Connections and their Classifications
Steel connections can be grouped into various classifications. The classification of the various types of steel connections assists with the…
Advanced Design of Stee Structures 5 min read
Connections in Steel Structures
The steel structures are constructed by properly connecting the available standard sections. The connections are an important part of steel…
Advanced Design of Stee Structures 3 min read
Steel: Design Of Connections
Section 10 of IS 800:2007 deals with the design and detailing requirements for joints between members. The connections in a…
Advanced Design of Stee Structures 7 min read
Limit State Design Philosophy
For achieving the design objectives, the design shall be based on characteristic values for material strengths and applied loads (actions),…
Advanced Design of Stee Structures 4 min read
Limit State Design: Basis For Design
The current revision of the code of practice, IS 800:2000, recommends limit state method for design of structures using hot…
