Load-bearing walls
A load-bearing wall is a structural wall that carries the weight of the roof and upper floors down to the…
Ideas and explainers from across SenseCentral.
A load-bearing wall is a structural wall that carries the weight of the roof and upper floors down to the…
Tilt-up construction involves site-casting the concrete walls of a building on its floor slab or on a separate casting bed…
A floor screed is usually a cementitious material made from a 1:3 or 1:4.5 ratio of cement to sharp sand.…
TermoDeck is an award-winning system that uses the thermal mass in hollowcore concrete floors to provide low energy heating and…
Hollowcore slabs derive their name from the voids or cores which run through the units. The cores can function as…
Flat slabs are highly versatile elements widely used in construction, providing minimum depth, fast construction and allowing flexible column grids.…
Post-tensioned (PT) slabs are typically flat slabs, band beam and slabs or ribbed slabs. PT slabs offer the thinnest slab…
Ribbed and waffle slabs provide a lighter and stiffer slab than an equivalent flat slab, reducing the extent of foundations.…
Stabilisation/solidification (S/S) is a civil engineering based ground remediation technique that involves the controlled addition and mixing of cementitious powders…
Retaining walls can be constructed in-situ using [formwork] or by using precast components. Precast retaining walls Precast retaining and…