metal and powder forming 6 min read
Swaging
Swaging is a process that is used to reduce or increase the diameter of tubes. A swagged piece created by…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
metal and powder forming 1 min read
Indirect Extrusion
Indirect extrusion is a particular type of metal extrusion process in which the work piece is located in a chamber…
metal and powder forming 2 min read
Direct Extrusion
Direct extrusion is a similar metal extrusion process to the one illustrated in figure 208. In direct, or forward extrusion,…
metal and powder forming 3 min read
Cold Extrusion Or Hot Extrusion
Metal extrusion is a forming process, like other metal forming processes, it can be performed either hot or cold. The…
metal and powder forming 3 min read
Metal Extrusion
Metal extrusion is a metal forming process in which a work piece, of a certain length and cross section, is forced…
metal and powder forming 9 min read
Hot Cold Working and the Rolling Process
Hot & Cold Working The distinction between hot working and cold working does not depends solely on the temperature, but…
metal and powder forming 16 min read
Classification of Metal Forming Processes
1. Compressive Forming Processes: In these processes the plastic state is reached by application of uni-axial or multi-axial compressive forces.…
metal and powder forming 2 min read
Elastic/Plastic Deformation
When a sufficient load is applied to a metal or other structural material, it will cause the material to change…
Mechanics of Machines 12 min read
Balancing Machines – Types, Classification, and Methods
The goal of rotor balancing is to reduce unbalance enough such that it can operate properly once installed on site. …
Mechanics of Machines 3 min read
Difference Between Static Balance and Dynamic Balancing
Balancing of Rotating Bodies The balancing of rotating bodies is important to avoid vibration. Dynamic and Static Balancing in Heavy…
