Basics 2 min read
Buffer Register and Controlled Buffer Register
Buffer registers are a type of registers used to store a binary word. These can be constructed using a series of flip-flops as…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Basics 2 min read
Schmitt trigger
Schmitt trigger is an electronic circuit with positive feedback which holds the output level till the input signal to comparator…
Basics 18 min read
Conversion of Flip-flops
Flip-flops are the basic building blocks of Sequential Circuits which can be converted from one form to another capable of…
Basics 5 min read
Edge-triggered Flip-Flops
So far, we’ve studied both S-R and D latch circuits with enable inputs. The latch responds to the data inputs…
Basics 2 min read
Gated Latches
Gated SR latchA synchronous SR latch (sometimes clocked SR flip-flop) can be made by adding a second level of NAND gates to the…
Basics 6 min read
The S-R Latch
A bistable multivibrator has two stable states, as indicated by the prefix bi in its name. Typically, one state is referred to as set and the…
Basics 4 min read
Priority Encoder
Priority Encoders take all of their data inputs one at a time and converts them into an equivalent binary code…
Basics 2 min read
Keyboard Encoder
A keyboard encoder is basically decimal to 8-4-2-1 BCD encoder. The truth table for decimal to BCD conversion can be represented like as follows,…
Basics 2 min read
BCD to 7 Segment Display
A seven-segment display is an electronic display device for displaying decimal numerals. Seven-segment displays are widely used in digital clocks,…
Basics 5 min read
Parallel Binary Adder
Definition: The Parallel binary adder is a combinational circuit consists of various full adders in parallel structure so that when more than 1-bit numbers…
