General Concepts 2 min read
Power Recovery Turboexpanders – Shaft Power Available
Commercial applications of high temperature power recovery turboexpanders use the expander to drive an air compressor which charges the process…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Automotive Safety 4 min read
Verification
When an initial FMEDA is setup to assess the safety readiness of a IP/SoC, the DC for the safety mechanisms…
Automotive Safety 4 min read
Functional Safety Requirements and Design Flow
Functional safety refers to taking active measures for achieving the required risk reduction in two spheres: reliability and active safety.…
Automotive Safety 2 min read
Timing Analysis
Though the hardware architectural metrics described so far do not include timing constraints, it is easy to understand that the…
Automotive Safety 2 min read
Functional Safety Analysis
Functional safety analysis is used to evaluate the safety level achieved by the product (e.g., an IP, an SoC). It…
Automotive Safety 3 min read
Basics of Functional Safety
In this section, we review the basic concepts of functional safety, its lifecycle and the analysis techniques Definition of Functional…
Automotive Safety 2 min read
Software Qualification
The qualification process for software and its component or units requires the following actions: · Defining the software functional requirements · Determination…
Automotive Safety 4 min read
ASIL Rankings of Safety Goals
The ASIL plays a vital role in achieving ISO 26262 compliance. It should be determined at the beginning of the…
General Concepts 2 min read
Side Stream Filtration Rate For Cooling Towers
Suspended solids (particulates or turbidity) are frequently found in cooling towers. At best these suspended solids will tend to settle…
Automotive Safety 4 min read
How to Implement ISO 26262
In many cases, a new standard is introduced during a new product introduction or pilot project. Adopting and implementing a…