basic 1 min read
Steel Pipes Thickness Chart
NPSinches N.D. O.D.mm 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS 1/8 – 10.3 1.24…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
basic 1 min read
Electronic Geometry Pigging
1. After successful completion of magnetic pig run EGP tool is launched. 2. This tool is mounted with battery operated battery device,…
basic 1 min read
Magnetic Pigging
1. This is a part of pre-commissioning activity, which ensures that there is no deformity in pipeline. 2. This is done prior…
basic 1 min read
Receipt Terminal
1. Receipt Terminal is provided at end location location of pipeline to facilitate handling and pumping of the product through the…
basic 1 min read
Dispatch Terminal
1. Dispatch Terminal (DT) is provided at start location of pipeline to facilitate handling and pumping of the product through the…
basic 1 min read
Intermediate Pigging
1. Intermediate Pigging (IP) stations are installed at regular intervals (as per design ~ 150 Kms.) having a Pig Launcher and…
basic 2 min read
Intelligent Pigs
1. The following should be considered in the design of pipelines, based on the requirements for intelligent pigging: 2. The internal diameter…
basic 1 min read
Double block and bleed
1. The isolation of the main stream and of the ancillary equipment on pig traps requires careful choice of valve type…