basic 2 min read
Offsite and Yard Piping Layout
In general, offsites piping (except tankages area), electrical cable and instrumentation cable shall be laid either on pipe rack or…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
basic 2 min read
Steam Piping
Steam Header Steam header shall be located generally on the upper tier and at one end of the rack adjacent…
basic 2 min read
Flare Piping
Slope Flare header shall be sloped towards flare knock-out drum. The desired slope shall be ensured throughout including flat loop.…
basic 1 min read
Utility Stations
Requisite number of utility stations shall be provided throughout the unit to cater to the utility requirement. Utility stations shall…
basic 3 min read
Equipment and Piping Layout for LPG Facilities
LPG Storage Vessels shall be arranged into groups each having a maximum of six vessels. Capacity of each group shall…
basic 2 min read
Air Cooled Heat Exchangers Layout
Air cooled heat exchanger is a most economical way of cooling down distillation tower overhead vapors in large quantities. Location…
basic 2 min read
Reactor Piping Layout
Catalyst Loading / Unloading All reactor piping shall be clear of the access areas of loading / unloading of catalyst.…
basic 6 min read
Pumps Equipment and Piping Layout
Pumps Equipment Layout Pumps shall be located close to equipment from which they take suction. Pumps in a process unit…
basic 3 min read
Furnaces Layout
Fired heaters are generally used to heat the feedstock so that it can be sent to a reactor for processing…
basic 2 min read
Pipe Racks Design and Piping Layout
Design of Pipe Rack involves considerable planning and cor-ordination with other engineering groups. Rack Design involves following activities. 1. Pipe rack…