Tin Smithy
Open Scoop Aim: To make an open scoop, using the given sheet metal. Note: 1. All Dimensions are in mm. 2. Remove the crossed symbol portion. Sequence of Operation: . Precautions:…
Hammers and Mallets
Hammers and mallets are used to apply moderate forces gently in the processes accompanied in tinsmithy such as forming and bending. Types of Hammers and Mallets Setting Hammer It has…
Stakes
Stakes are supporting tools used in sheet metal work. These are used to form, seam, bend or rivet the sheet metal objects. Stakes are made of wrought iron, faced with…
Snips
Snips are hand shears varying in length from 200mm to 600mm. The 250 mm length is the commonly used one. Types of Snips Straight snip It has a straight blade…
TIN SMITHY
Tin smithy deals with the production of components in a wide variety of shapes and sizes from a sheet of metal with the aid hand or machines. For example many…
Dovetail Lap joint
Aim: To make a dovetail lap joint from the given two reapers. Sequence of Operations Precautions: Note : All Dimensions are in mm.
Carpentry
T-LAP JOINT Aim: To make a T-lap joint from the given two reapers. Sequence of Operation: Precautions: Result: Note :
Cutting Tools
Saws A saw is used to cut wood into pieces. There are different types of saws, designed to suit different purposes. A saw is specified by the length of its…
Holding Tools
Carpenter's Vice It is used as a work holding device in a carpenter shop. Its one jaw is fixed to the side of the table while the other is movable…
Marking and Measuring Tools
Accurate marking and measurement is very essential in carpentry work, to produce parts to exact size. To transfer dimensions onto the work; the following are the marking and measuring tools…
