Basics 3 min read
What is Physical Layer & The Function of Physical Layer
The physical layer is the lowest layer of the OSI model. This layer controls the way unstructured, raw, bit -stream data…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Basics 3 min read
Retrospective on Ethernet
Ethernet is a set of technologies and protocols that are used primarily in LANs. It was first standardized in the…
Basics 2 min read
Thick Ethernet vs thin Ethernet
Thick Ethernet Thick Ethernet was the first commercially available form of cabling supported by Ethernet. It is technically known as…
Basics 3 min read
Switched Ethernet vs. Classic Ethernet
Ethernet is a set of technologies and protocols that are used primarily in LANs. It was first standardized in 1980s…
Basics 3 min read
Exterior Gateway Protocol (EGP)
EGP is a protocol used to exchange data between gateway hosts that are neighbors with each other within autonomous systems.…
Basics 2 min read
Routing Information Protocol (RIP)
RIP is used in both LAN and WAN Networks. It also runs on the Application layer of the OSI model. The…
Basics 1 min read
Distance Vector Routing Protocol (DVR)
Distance Vector Protocols advertise their routing table to every directly connected neighbor at specific time intervals using lots of bandwidths…
Basics 2 min read
What is Routing Protocols?
Routing Protocols are the set of defined rules used by the routers to communicate between source & destination. They do not…
Basics 2 min read
Sliding Window Protocol
Sliding window protocols are data link layer protocols for reliable and sequential delivery of data frames. The sliding window is…
Basics 3 min read
Sublayers of Data Link Layer
Data Link Layer has two sublayers, Logical Link Control (LLC):This is the uppermost sub-layer, LLC consists of protocols running at…