Application of RFID in Textile and Apparel Industry
Radio frequency identification device (RFID): A micro-chip in a label used to transmit data when the label is exposed to radio waves. RFID is an Automatic Data Capture technology that…
Overview of Denim Fabric Production with Flow Chart
Introduction: The wide consumption of denim by fashion globally has created a new opportunity for Bangladesh. The industry in Bangladesh presently has 30 denim producing factories with total investment of over USD…
Verification Tests of Antimicrobial Finish
The types of test for verification of antimicrobial finish in our research work is: Quantitative Test Qualitative Test helps us to verify that whether antimicrobial finish is applied properly on the…
Materials And Methods
Materials: Turmeric Powder: The roots of turmeric are collected from the market. Then collected turmeric roots are washed with clean water to remove the dust and impurities. Cleaned turmeric was…
History of Antimicrobial Finish
During world war II, when cotton fabric was extensively used for tent age, tarpaulins and truck covers, these fabrics need to be protected from rotting caused by microbial attack. This…
Antimicrobial Finishing of Cotton Fabric with Turmeric and Chitosan
Introduction Background: Recently, there has been upsurge interest in the textile engineering all over the world for much demanding functionality of the products like wrinkle resistance, water repelling, fade resistance and resistance…
In Textile Dyeing Process Dyeing
It is the process that is used for the coloration of different textile materials. In this step lots of dyes or pigment and different types of auxiliaries are used for…
Other Adjustment that Influence in the Posterior Shed
Warp stop adjustment: The influence of the profundity and height of the Warp stop, is also important for a good shed and a good appearance of the fabric. Warp stops Profundity: 1. If…
Basic Controls
Is necessary to ensure the correct state and operation of the mechanical and electronic parts of the loom to rule out possible open and / or dense by default of machine,…
Stop Marks, Starting Marks and Setting Shed in Weaving
Is important to start by explaining that the stop marks and starting marks are common defects in the weaving, the difference, which can be an advantage or a disadvantage, is due…
