Mechanics of Marine Machines 3 min read
Gravity control
In gravity control – gravity controlled instruments, as shown. A small adjustable weight is attached to the spindle of the…
THE ARCHIVES
Author: senseadmin.
Prabhu TL is an author, digital entrepreneur, and creator of high-value educational content across technology, business, and personal development. With years of experience building apps, websites, and digital products used by millions, he focuses on simplifying complex topics into practical, actionable insights. Through his writing, Dilip helps readers make smarter decisions in a fast-changing digital world—without hype or fluff.
← Explore all topics
Engineering Chemistry 2 min read
PAINTS
Paints are applied on the surfaces of timber, metals and plastered surfaces as a protective layer and at the same…
Engineering Chemistry 1 min read
Uses of Cement
Cement is used widely for the construction of various structures. Some of them are listed below: (i) Cement slurry is…
Engineering Chemistry 5 min read
Physical Tests on Cement
(a) Soundness Test: It is conducted by sieve analysis. 100 gms of cement is taken and sieved through IS sieve No. 9…
Engineering Chemistry 2 min read
Properties of Ordinary Portland Cement
(i) Chemical properties: Portland cement consists of the following chemical compounds: (a) Tricalcium silicate 3 CaO.SiO2 (C3S) 40% (b) Dicalcium silicate 2CaO.SiO2 (C2S) 30%…
Mechanics of Marine Machines 3 min read
Comparison between Involute and Cycloidal Gear Tooth Profiles
Involute tooth profile is almost used generally everywhere and given preference over cycloidal tooth profile or any other gear tooth form. This doesn’t…
Mechanics of Marine Machines 2 min read
Internal Gears
Internal gear is a gear with its teeth cut in the internal surface of a cylinder and meshes with spur…
Mechanics of Marine Machines 4 min read
CONTACT RATIO
To assure continuous smooth tooth action, as one pair of teeth ceases action a succeeding pair of teeth must already…
Effective Thermal Insulation 15 min read
A New Method for Numerical Modeling of Heat Transfer in Thermal Insulations Products
Mineral fiber products are the most common group of thermal insulations currently in use. Heat transfer in these materials has…
Effective Thermal Insulation 26 min read
High Energy Performance with Transparent (Translucent) Envelopes
Energy efficiency is coming to the forefront in the architecture, as, apart from the significance of a reduced environmental impact…
Mechanics of Marine Machines 1 min read
Minimum number of teeth on the pinion in order to avoid interference
Introduction:Interference may only be avoided, if the point of contact between the two teeth is always on the involute profiles…
Effective Thermal Insulation 20 min read
Traditional Houses with Stone Walls in Temperate Climates: The Impact of Various Insulation Strategies
The European Directive 2010/31/EU states that the measures to improve the energy performance of new and existing buildings should take…