Design of Structures 2 min read
Laser Beam Welding (LBW)
Fusion welding process in which coalescence is achieved by energy of a highly concentrated, coherent light beam focused on joint.…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Design of Structures 6 min read
SPECIAL WELDING PROCESS
1.Submerged arc welding • Weld arc is shielded by a granular flux , consisting of silica, lime, manganese oxide, calcium fluoride…
Design of Structures 2 min read
Welding Process
When two members are connected by means of welds, such a connection is known as welded connection. Welding offers an…
Design of Structures 1 min read
Laterally Unsupported Beams
The beam is probably the most useful constructional unit which the modern engineer has at his disposal. It is, therefore,…
Design of Structures 5 min read
Built-Up Compression Members
Design of built-up compression members should comply with the basic requirement for prevention of local and overall buckling of compression members…
Design of Structures 4 min read
GUIDELINES FOR THE DESIGN OF LACING SYSTEM
The angle of inclination of the lacing with the longitudinal axis of the column should be between to . The slenderness ratio of…
Design of Structures 5 min read
MAXIMUM SLENDERNESS RATIO
According to Indian Standard IS 800, the slenderness ratio should not exceed the values given in the table below: No. …
Design of Structures 3 min read
DESIGN OF STEEL COMPRESSION MEMBERS
A structural member loaded axially in compression is generally called a compression member. Vertical compression members in buildings are called…
Design of Structures 2 min read
LUG ANGLELUG ANGLE
INTRODUCTION · Lug angle is small piece of angle used to connect outstand legs of the members to the gusset plate.…
