Design of Structures 6 min read
Design Consideration Of Tension Members
Tension members, as described in IS 800:2007, can sustain loads up to the ultimate load, at which stage they may…
THE ARTICLE LIBRARY
All stories.
Ideas and explainers from across SenseCentral.
Design of Structures 1 min read
PERMISSIBLE STRESSES IN AXIAL TENSION
It is related to the guaranteed minimum yield point of steel with an appropriate factor of safety. Most of the…
Design of Structures 2 min read
NET AREA & PERMISSIBLE STRESSES FOR TENSION MEMBERS
NET AREA CALCULATION FOR TENSION MEMBERS When tension members are spliced or connected to a gusset plate by rivets or…
Design of Structures 2 min read
Types Of Tension Members
Structural members subjected to tensile forces are known as tension members. IS 800:2007 describes Tension members in Cl. 6.1 as…
Design of Structures 1 min read
What is a tension member?
A tension member in relation to construction or civil engineering is a member which undergoes tension more than compression as…
Design of Structures 4 min read
Analysis And Design Of Butt(Groove) Welds
ASSUMPTIONS IN THE ANALYSIS OF WELDED JOINTS The following assumptions are made in the analysis of welded joints. � Welds connecting…
Design of Structures 1 min read
Inspection Of Welds
As we have seen in previews website pages, defects in welds are inevitable. Nevertheless, the poor weld quality leads to…
Design of Structures 2 min read
Weld Defects
WELD DEFECTS Defects in welding are inevitable in spite of using the good welding techniques, standa rd electrodes and preparation…
Design of Structures 7 min read
Analysis And Design Of Fillet Welds
Analysis And Design Of Fillet Welds ASSUMPTIONS IN THE ANALYSIS OF WELDED JOINTS The following assumptions are made in the…
Design of Structures 2 min read
Advantages And Disadvantages Of Welded Joints
· The following are the advantages of welded joints. · Due to the absence of gusset plates and other connecters, the welds…
