Vacuum Systems

Vacuum systems are very common for driving gyro instruments. In a vacuum system, a stream of air directed against the rotor vanes turns the rotor at high speed. The action…

Boomi Nathan

Electrical Motor Overhauling on Ships

Like any other mechanical machinery, electrical motors also have their own running hours, after which, the complete overhauling of the motor is to be done to ensure efficient working and…

senseadmin

Earth Fault on Ships

Earth fault is considered very critical on board a ship. Some ships, which operate at 440V do not have any trip devices attached for a single earth fault. However, when…

senseadmin

Blackout Situation

Blackout is one condition each and every mariner is familiar with and also afraid of. It is one situation everyone on the ship is terrified of as it brings the…

senseadmin

Solid State Magnetometers

Solid state magnetometers are used on many modern aircraft. They have no moving parts and are extremely accurate. Tiny layered structures react to magnetism on a molecular level resulting in…

Boomi Nathan

Solid state magnetometer units

Further enhancements to direction finding systems of this type involving the integration of radio navigation aids are common. The radio magnetic indicator (RMI) is one such variation. In addition to…

Boomi Nathan

Main And Emergency Switchboard Safety

It is very important to isolate any type of fault in an electrical system supplied from the main switchboard (MSB), or else, it will affect all the other systems connected…

senseadmin

Amplifier And Amplifier Circuits

An Amplifier or an operational amplifier (op-amp) circuit is commonly used in the automation, control and other electronic circuits of marine applications. The applied input signal is normally a voltage…

senseadmin

Rectifier And Rectifier Circuits

Since most of the ships generate A.C current from its alternator, it becomes essential to use a device, along with the transformer, that can convert this A.C current into D.C…

senseadmin

Thermocouples

Thermocouple is a device widely used as a pyrometer on board ships for continuous measurement of temperature for machinery systems such as main engine, auxiliary engine, gas turbines etc. It…

senseadmin