| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 1 m | 20 |
| VALVE (GATE / GLOBE) | 2 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 15 m | 20 |
| VALVE (GATE / GLOBE) | 4 | 20 |
| CHECK VALVE | 1 | 20 |
| EQUAL TEE | 1 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 12 m | 20 |
| VALVE (GATE / GLOBE) | 3 | 20 |
| EQUAL TEE | 1 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 18 m | 20 |
| VALVE (GATE / GLOBE) | 5 | 20 |
| CHECK VALVE | 1 | 20 |
| EQUAL TEE | 2 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| EQUAL TEE | 1 | 15 |
| VALVE (GATE / GLOBE) | 2 | 15 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 15 |
| PIPE | 2 m | 15 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| EQUAL TEE | 2 | 15 |
| VALVE (GATE / GLOBE) | 4 | 15 |
| CHECK VALVE | 1 | 15 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 15 |
| PIPE | 10 m | 15 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 0.6 m | 20 |
| VALVE (GATE / GLOBE) | 2 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
| MATERIAL LIST | ||
| ITEM | QTY | SIZE (NB) |
| HALF COUPLING | 2 | 20 |
| PIPE | 15 m | 20 |
| VALVE (GATE / GLOBE) | 4 | 20 |
| CHECK VALVE | 1 | 20 |
| EQUAL TEE | 1 | 20 |
| STEAM TRAP WITH INTEGRAL STRAINER | 1 | 20 |
Maximum spacing of steam traps & drip legs
1. This guide is an approximation for maximum spacing of steam traps when used for condensate drawing of steam supply headers
| Metres (feet) |
2. It is based on a condensate formation rate of 70 to 80 kg/hr (150 to 180 lb/hr) under normal running conditions for insulated steel pipe at 150c (600f) ambient temperature.
3. During the warming up period it is possible that the condensate formation rate will on average exceed the normal formation rate by a factor of 10.
| SATURATED STEAM PRESSUREkg/cm2(PSIG) | STEAM SUPPLY HEADER SIZE | MM | ||||
| (INCH) | ||||||
| 80 & UNDER (3″ & UNDER) | 100 & 150 (4″ & 6″) | 200 & 250 (8″ & 10″) | 300 & 400 (12″ & 16″) | 450 & 500 (18″ & 20″) | 600 (24″) | |
| 9 (125) | 150 (500) | 150 (500) | 120 (400) | 105 (350) | 90 (300) | 75 (250) |
| 18 (250) | 150 (500) | 135 (450) | 90 (300) | 90 (300) | 75 (250) | 60 (200) |
| 32 (450) | 120 (400) | 105 (350) | 90 (300) | 75 (250) | 60 (200) | 45 (150) |
| 42 (600) | 120 (400) | 105 (350) | 75 (250) | 75 (250) | 60 (200) | 45 (150) |
| 63 (900) | 120 (400) | 90 (300) | 75 (250) | 75 (250) | 60 (200) | 45 (150) |
| HEADER NOM. DIA mm (inch) | DRIP LEG DIMENSIONS |
| mm (inch) | |
| 20 (3/4″) | 20 (3/4″) |
| 25 (1″) | 25 (1″) |
| 40 (1 1/2″) | 40 (1 1/2″) |
| 50 (2″) | 50 (2″) |
| 80 (3″) | 80 (3″) |
| 100 (4″) | 100 (4″) |
| 150 (6″) | 150 (6″) |
| 200 (8″) | 150 (6″) |
| 250 (10″) | 150 (6″) |
| 300 (12″) | 150 (6″) |
| 350 (14″) | 200 (8″) |
| 400 (16″) | 200 (8″) |
| 450 (18″) | 200 (8″) |
| 500 (20″) | 200 (8″) |
| 600 (24″) | 200 (8″) |
| 750 (30″) | 250 (10″) |
| 900 (36″) | 250 (10″) |
| 1050 (42″) | 250 (10″) |
| 1150 (46″) | 250 (10″) |
