Mean Piston Speed

senseadmin
3 Min Read
Disclosure: This website may contain affiliate links, which means I may earn a commission if you click on the link and make a purchase. I only recommend products or services that I personally use and believe will add value to my readers. Your support is appreciated!

What is Mean Piston Speed ?

The mean piston speed is the average piston speed in the reciprocating engine.

Or,Piston speed usually refers to the average or average speed of the piston when it travels up and down in the cylinder bore with each turn of the crankshaft.

Since the piston actually comes to a complete stop at the top of the stroke (TDC) and the bottom of the stroke (BDC), its speed and acceleration at any given point is always changing.

The piston either accelerates from or slows down to zero rpm.

This is the function of stroke and RPM.

Formula of Mean Piston Speed

The formula for MPS yields an average speed based on two times the stroke (up and down for one revolution), times the speed of engine (RPM) divided by 60.

MPS = 2 * Stroke * RPM / 60

There is a factor of 2 in the equation for a single stroke to occur in 1/2 of the crank revolution (or alternatively: two strokes per one crank revolution) and a ’60’ to convert seconds from minutes to RPM.

For example, a piston in an automobile engine which has a stroke of 90 mm will have a mean piston speed at 3000 rpm of 2 * (90 / 1000) * 3000 / 60 = 9 m/s.

How do you get the expression for “MPS” as 2LN?

Term for MPS = 2LN

Explanation for ‘2L’:

in one crack revolution, the piston OF engine travels from TDC to BDC (covering stroke length L) and again from BDC to TDC (covering stroke length L). That is why the word has ‘2L.’

Reason for N (in rpm): As speed = distance / time, the distance traveled above 2L is for a length of 1min (as N is in rotation per minute).

Thus, the speed = 2LN is in meters per minute (in this case).

Relation between MPS and Power

Power :- Work done on the piston during working cycle is P (mean pressure).V (volume displaced by piston)

Power :- P.V. (n/s), n= no. of revolutions per sec. and s = stroke/cycle.

For two stroke engine, s = 1 and for four stroke engine s = 2.

Volume (V) = (area) . (length)
Area = A and Length = L

Now, Power = (constant) . 2 . P . L . A . N

Power = (constant) . P . A . (2LN)

(2LN) = MPS, also power is directly proportional to mps.

Share This Article
Follow:
Prabhu TL is an author, digital entrepreneur, and creator of high-value educational content across technology, business, and personal development. With years of experience building apps, websites, and digital products used by millions, he focuses on simplifying complex topics into practical, actionable insights. Through his writing, Dilip helps readers make smarter decisions in a fast-changing digital world—without hype or fluff.
Leave a review