Multiplexing also may be conducted through the interleaving of time segments from different signals onto a single transmission path—a process known as time-division multiplexing (TDM). Time-division multiplexing of multiple signals is possible only when the available data rate of the channel exceeds the data rate of the total number of users. While TDM may be applied to either digital or analog signals, in practice it is applied almost always to digital signals. The resulting composite signal is thus also a digital signal.
Digital multiplexing, as employed in the North American telephone systemIn time-division multiplexing (TDM), 24 digitized voice signals, each at 64 kilobits per second, are assigned successive time slots in a 1.544-megabits-per-second signal. Combined signals are further combined to form data streams of increasing bit-rate and voice-carrying capacity.
In a representative TDM system, data from multiple users are presented to a time-division multiplexer. A scanning switch then selects data from each of the users in sequence to form a composite TDM signal consisting of the interleaved data signals. Each user’s data path is assumed to be time-aligned or synchronized to each of the other users’ data paths and to the scanning mechanism. If only one bit were selected from each of the data sources, then the scanning mechanism would select the value of the arriving bit from each of the multiple data sources. In practice, however, the scanning mechanism usually selects a slot of data consisting of multiple bits of each user’s data; the scanner switch is then advanced to the next user to select another slot, and so on. Each user is assigned a given time slot for all time.
Most modern telecommunications systems employ some form of TDM for transmission over long-distance routes. The multiplexed signal may be sent directly over cable systems, or it may be modulated onto a carrier signal for transmission via radio wave. Examples of such systems include the North American T carriers as well as digital point-to-point microwave systems. In T1 systems, introduced in 1962, 24 voiceband signals (or the digital equivalent) are time-division multiplexed together. The voiceband signal is a 64-kilobit-per-second data stream consisting of 8-bit symbols transmitted at a rate of 8,000 symbols per second. The TDM process interleaves 24 8-bit time slots together, along with a single frame-synchronization bit, to form a 193-bit frame. The 193-bit frames are formed at the rate of 8,000 frames per second, resulting in an overall data rate of 1.544 megabits per second. For transmission over more recent T-carrier systems, T1 signals are often further multiplexed to form higher-data-rate signals—again using a hierarchical scheme.
